USB300 - USB 1:2 Portable Flash Duplicator

MSRP: CAD$264.32
Sale Price: CAD$240.24
— You save CAD$24.08
Frequently bought together:


  • Speed transfers up to 1.5 GB/min
  • Dedicated bandwidth for high volume duplication
  • Supports all brands of USB devices
  • Embedded Controller supports all brands of USB devices

The USB300 Flash duplicator is a stand alone, high speed and convenient equipment for easily copy data anytime and quickly check Flash device's quality. The checking capability assists you to find out defective Flash device efficiently, like Capacity Check enables you to find out the real capacity of Flash device; Measure Speed helps you to check each Flash device's read and write speed.

The 2 target USB Flash Duplicator is stand alone, no need of PC or any installation procedure. When the system is turned off, nothing will be left in it, so there is no risk of virus infection. The duplicator features instant power on and off for quick boot up and shut down, as a result the duplicator saves you time. Its lightweight design, friendly interface and easy operation is ideal for personal, office and shops application.

  • Impeccable copy speed: up to 2 GB per min for each port.
  • Support multiple Flash media: it enables you to copy multiple Flash media of SD, MS, CF through a qualified USB interface card reader.
  • Quick copy supports Linux (ext2/ext3/ext4) and NTFS, FAT16/32.
  • The USB stick can have a capacity up to largest size from market.
  • Standalone, no PC required to operate the USB duplicator.
  • Compatible with the USB drive 2.0/3.0/3.1.
  • Light weight and portable design.


  • Standalone, FPGA based operation. (Non-PC based).
  • Ultra-High Data Bandwidth Performance:
    • Speed transfers up to 1.5 GB/min.
    • Dedicated bandwidth enables high volume duplications without speed degradation.
  • Copy Modes:
    • Quick copy (Data & System): Supports Windows (NTFS), FAT16/32/64, and Linux (ext2/3/4).
    • Whole Media: Bit-for-bit copy mode that copies exactly like the master device. Supports all proprietary and unknown formats.
  • Diagnostic Modes:
    • H3 Test: Only reads to verify the maximum capacity quality. (All data is 100% safe)
    • H5 Test: Overwrites then reads to verify maximum capacity quality. (All data is destroyed)
    • Capacity Check: Analysis of device’s available capacity.
    • 3 Sanitization Modes: Quick Erase, Full Erase, and DoD Erase.


The embedded controller of the USB300 Flash duplicator is designed to support USB devices with capacities up to 2TB. This ensures compatibility with a wide range of Flash devices available in the market. The duplicator is constantly updated to support the latest devices, ensuring that users can duplicate and check the quality of the most recent models. Whether you have a popular brand or a lesser-known one, the USB300 Flash duplicator supports all brands of USB devices, providing a versatile solution for various device types.

Hardware Design for Portability

The USB300 Flash duplicator features a small footprint design that allows for portability. Its compact size and lightweight construction make it easy to carry and transport, making it ideal for users who need to duplicate and check Flash devices on the go. The hardware design ensures durability and reliability, enabling the duplicator to withstand regular use and transportation without compromising performance.

Impeccable High-Speed Performance

One of the notable features of the USB300 Flash duplicator is its impeccable high-speed performance. It can copy data at a remarkable rate of up to 2GB per minute on all devices, regardless of the number of targets. This means that even when duplicating data to multiple devices simultaneously, the duplicator maintains its exceptional speed without any degradation. Whether you need to duplicate a few devices or hundreds of them, the USB300 Flash duplicator ensures efficient and fast copying.

Powerful H5 Flash Quality Checking Tool

The USB300 Flash duplicator includes the H5 Flash Quality Checking Tool, a powerful inspection tool for processing large-volume quantity quality testing with utmost efficiency. This tool offers the highest efficiency by checking bulk quantities of Flash devices simultaneously. It provides detailed quality testing results, including information on bad sector quantity, writing speed, and reading speed. The tool utilizes a red light to indicate when a Flash device doesn't meet the selected standard. Moreover, it allows users to set their own standards by configuring limitations on bad sector quantity, minimum reading speed, and minimum writing speed.

Questions & Answers

Q1. Does the USB300 Flash duplicator require a PC to operate?
No, the USB300 Flash duplicator is standalone and does not require a PC or any installation procedure to function.

Q2. Is the USB300 Flash duplicator lightweight and portable?
Yes, the USB300 Flash duplicator features a lightweight design and compact size, making it easy to carry and transport.

Q3. What is the copy speed of the USB300 Flash duplicator?
The USB300 Flash duplicator can achieve copy speeds of up to 2 GB per minute for each port, ensuring fast and efficient data duplication.

Q4. Can the USB300 Flash duplicator copy multiple Flash media formats?
Yes, the USB300 Flash duplicator supports multiple Flash media formats, including SD, MS, and CF, through a qualified USB interface card reader.

Q5. Does the USB300 Flash duplicator support different file systems?
Yes, the USB300 Flash duplicator supports various file systems, including Linux (ext2/ext3/ext4), NTFS, FAT16/32/64, allowing for versatile copying.

View AllClose

Technical Specs

Model: UB300
Target: 1:2
Specification: Maximum Transfer Speed: 1.5 GB/min. *Actual performance is dependent on USB transfer speeds*
Capacity: - Supports the latest market available capacity.
- Designed support capability up-to 2TB+
Operation Type: Stand-alone, FPGA based operation (Non-PC based)
Language Support: English, Japanese 
LCD Display: Backlit Monochrome LCD Display
Status LED: 2 LED (Red/Green) Indicators per port
Control Panel: 4 push buttons (up, down, OK, ESC) 
Features: Copy Modes - Quick Copy (Systems & Files Copy)
- Whole Media Copy
- Asynchronous Duplication
Compare Function Bit-for-Bit data comparison
Diagnostic Modes - Speed Test, Capacity Test, A2 Fake Card Test
- H3 Test: Read Only (Entire capacity)
- H5 Test: Overwrites and Reads (Entire capacity)
Sanitization Modes Quick Erase, Full Erase, DoD Erase
Format Functions FAT16/32 Format, Auto Format
Compatibilities: Compatible Devices USB3.0/USB 2.0/ USB 1.1/ USB Flash/ USB HDD
Supported Formats - Quick Copy: FAT16/32/64, Windows (NTFS), and Linux (Ext2/Ext3/Ext4) - Whole Media Copy: All Formats, including proprietary formats.
Supported O/S All (Windows, Linux, and other standalone systems)
Supported USB-HDD Yes
Hardware Specifications: Power Supply: 5V 2A
Temperature: - Working: 5C~ 45C
- Storage: -20C ~85C
View AllClose